Lock Deformer button causes performance changes

cillia · October 2023

Even when locking all deformers and art meshes, program FPS changes when the Lock Deformer button is active. This video is with all of the model's folders locked, so no deformers or art meshes are visually being displayed. When the Lock Deformer button in the main window is enabled in this state, I gain about 5-6 FPS compared to when it is disabled.

https://drive.google.com/file/d/1HcPTMibU5dQCJm-kvQCrzNTKBfXZnBiG/view?usp=sharing

I'm confused as to why this should affect performance. If all of the model is locked, then clicking the Lock Deformer button should have no change in performance as it is the same function.

I tested this in 4.2 as well, and while there isn't an FPS counter I am able to see a similar change in performance under the same circumstances.

Enoko(Staff) · October 2023

@cillia

Thank you for always using our products.

The information display at the top right of the viewing area is for obtaining information when providing support.
These are only reference values and have low accuracy, and we do not recommend that users refer to them during production.

Thank you.

obsidian · October 2023

@cillia
Hello, there.
Please tell me the difference between Locking all deformer button and Lock Deformer button.

I don't understand your situation. Can you upload a screenshot the palette?

cillia · October 2023

@Enoko(Staff)
@obsidian

Sorry if my initial post was a bit misleading. I was using the FPS counter to add to my point, not specifically relying on it. Here's a video hopefully better showing the issue. Apart from the actual FPS stats showing, you can visually see the difference in lag between the different settings.
https://drive.google.com/file/d/1X0pply0qwWpCgq8BX3po53mLhSioclR2/view?usp=sharing
(Sorry for the mouse not lining up correctly, that's a capture software error)

From my understanding, there shouldn't be a difference in the performance result between locking all parts/deformers and using the Lock Deformer button. However, there is clearly a performance discrepancy.

obsidian · October 2023

@cillia
Im sorry, I have no idea that the `Lock Deformer` button.

This is the `Lock all part/deformer` button, isn't it?

Then, where is the `Lock Deformer` button?
Sorry for the hassle, but I would appreciate it if you could attach a picture showing the procedure or the location of the button.

cillia · October 2023

obsidian said:
@cillia
Im sorry, I have no idea that the `Lock Deformer` button.

This is the `Lock all part/deformer` button, isn't it?

Then, where is the `Lock Deformer` button?
Sorry for the hassle, but I would appreciate it if you could attach a picture showing the procedure or the location of the button.

This is the Lock Deformer button.

obsidian · November 2023

Thanks, cillia. I understand the button's diff.

Enoko(Staff) · November 2023

@cillia
@obsidian

I apologize for the late reply.

There is also a slight performance impact as hiding changes the amount of internal processing.
Also, since the internal processing differs slightly depending on the type of hiding, performance will also vary depending on these effects.

Please rest assured that this is normal behavior according to Cubism Editor specifications.
Thank you!

Howdy, Stranger!

Quick Links

Categories

Lock Deformer button causes performance changes

Comments