각도를 사용한 호흡 물리 진자가 이상하게 작동합니다.

Answers

• Katomon

  March 11

  Once you add too many pendulums, they go idle, so they get stuck like this, you can increase the normalization to make it unstick c:

  0 · Share on FacebookShare on Twitter Share on Google+
• ookubo(staff)

  March 13

  Hi @FS2
  
  저희 제품을 이용해 주셔서 감사합니다.
  먼저 어떤 환경에서 사용하시는지 알려주세요.
  - Live2D 소프트웨어 버전: (예: Cubism Editor 4.0.01)
  - OS 및 버전: (예: Windows 10, macOS HighSierra)
  - PC 모델: (예: MacBookPro 2017)
  - 그래픽 사양: (예: GeForce GTX 950M) - - 그래픽 사양: (예: GeForce GTX 950M)
  CPU: (예: Intel Core i7-7700 ) - - CPU
  메모리: (예: 8GB) - 메모리: (예: 8GB)
  - 사용 중인 일러스트레이션 프로그램: (예: 포토샵, 클립스튜디오, SAI)
  
  그리고 문제가 발생한 모델 파일과 로그 파일을 아래 데이터 박스에 저장해 주세요.
  https://biz.datadeliver.net/posts/wdy57LGNxqF0
  
  로그 파일 가져오기 방법은 아래 설명을 참고하시기 바랍니다.
  https://help.live2d.com/ko/other/other_22/
  
  감사합니다.
  
  
  Thanks for using our products.
  First of all, please tell us what environment you are using.
  - Live2D software version: (e.g. Cubism Editor 4.0.01)
  - OS and version: (e.g. Windows 10, macOS HighSierra)
  - PC model: (e.g. MacBookPro 2017)
  - Graphics specification: (e.g. GeForce GTX 950M)
  CPU: (e.g. Intel Core i7-7700) -
  Memory: (e.g. 8GB)
  - Illustration software used: (e.g. Photoshop, ClipStudio, SAI)
  
  Next, please store the model and log files that are causing the problem in the following data box
  https://biz.datadeliver.net/posts/wdy57LGNxqF0
  
  For instructions on how to retrieve the log file, see the following instructions
  https://help.live2d.com/ko/other/other_22/
  
  Best regards.

  0 · Share on FacebookShare on Twitter Share on Google+
• ookubo(staff)

  April 4

  Hi @FS2
  
  Sorry for the delay in getting back to you.
  
  We have confirmed that this issue is a glitch.
  The cause is currently under investigation.
  
  A workaround for this phenomenon is also under investigation.
  At this stage, we do not have any information on how to fix this issue.
  
  We will continue to look into this issue, including our fix policy, so we are very sorry for the inconvenience, but please wait a while for a response.
  
  Best regards.

  0 · Share on FacebookShare on Twitter Share on Google+