Too many problems??? please help!!!!

Comments

• Ran_TH

  December 2016

  Seems like an unsupported graphic card issue, could you list out your computer system specifications? Like what GPU card you use, CPU, RAM etc.

  0 · Share on FacebookShare on Twitter Share on Google+
• trapflower

  December 2016

  OS Name Microsoft Windows 10 Home
  Version 10.0.14393 Build 14393
  Other OS Description Not Available
  OS Manufacturer Microsoft Corporation
  System Manufacturer Dell Inc.
  System Model Inspiron N5050
  System Type x64-based PC
  Processor Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz, 2400 Mhz, 2 Core(s), 4 Logical Processor(s)
  
  and I have 4 gigs of RAM. I don't know if I'm doing it right

  0 · Share on FacebookShare on Twitter Share on Google+
• [Deleted User]

  December 2016

  @Ran_TH
  Thanks for your support!
  
  @trapflower
  System requirements for Live2D Cubism 2.1 is listed below.
  
  - Windows Vista/7/8.1 /10
  - Pentium4 3GHz or faster
  - 2GB memory or more (8GB recommended)
  - Storage
  
  Requires 5M for install and 500MB or more for temporary usage depending on length of motion tracks.
  
  - Internet connectivity
  - GPU: OpenGL3.3 / GeForce 8 or better
  Software may not function properly when running with an on-board GPU (e.g. Intel HD Graphics)
  
  There are some reports that the similar trouble to yours might been solved by updating GPU driver. Is your GPU driver the latest one?

  0 · Share on FacebookShare on Twitter Share on Google+
• Ran_TH

  December 2016

  No problem, @dai.s@live2d
  
  @trapflower
  If this is your laptop http://www.tesco.com/direct/dell-inspiron-n5050-laptop-intel-core-i3-4gb-500gb-156-display-black/215-3605.prd?source=others
  
  Then it has Intel HD Graphics 3000 GPU which is not supported as @dai.s@live2d has mentioned before...maybe you can try to update your GPU drivers.

  0 · Share on FacebookShare on Twitter Share on Google+
• trapflower

  December 2016

  I had to use it on my Surface Pro 4, I can see everything but I still can't save

  0 · Share on FacebookShare on Twitter Share on Google+
• Ran_TH

  January 2017

  @trapflower
  I remember I have issues with saving because I used PSD Import and manually replaced the texture with Texture Editor.
  Maybe you can try to make a new document and re-import the PSD file, then don't make any changes and try to save it. See if it works.

  0 · Share on FacebookShare on Twitter Share on Google+
• trapflower

  January 2017

  The document was made in Krita because I don't have Photoshop. Maybe that's the problem?

  0 · Share on FacebookShare on Twitter Share on Google+
• Ran_TH

  January 2017

  trapflower said:

  The document was made in Krita because I don't have Photoshop. Maybe that's the problem?

  Could be, make sure it's 8-bit RGB format.
  But are you using PSD Import?
  If you are importing PSD with PSD Import and want to update your PSD file, you have to go through same process. Otherwise you'll be getting error in saving.

  0 · Share on FacebookShare on Twitter Share on Google+
• nagy

  August 2017

  @trapflower did you solve your problem while saving? 'cuz i have the same problem
  i also made a psd file by krita and my pc system specifications is fine

  0 · Share on FacebookShare on Twitter Share on Google+